What conditions govern carpentry estimates, callouts, and on-site fitting?

When did these operational terms take effect?

These Terms of Service took effect on October 27, 2026. They govern all digital interactions across drevantos.com, all scope assessments initiated via our contact forms, and all initial communications with our workshop.

Who provides the carpentry services under this agreement?

This website and the associated architectural carpentry operations are owned and managed by Drevantos, an independent trade workshop founded and operated by carpenter Ivan Petrov (working in the carpentry trade since 2018; logged trade association membership and 25 verified Chicago installations).

Our principal physical business address is 400 East Monroe Street, Chicago, Illinois 60603, Chicago, Illinois, United States. Direct operational contact is maintained by telephone at +1 (707) 555-6244 and via email at [email protected].

What woodwork and carpentry services fall within our scope?

Drevantos provides residential architectural woodworking, interior finish carpentry, and on-site fitting within the Chicago metropolitan area. Our core scope includes:

• Installation and scribing of wood trim, baseboard, door casing, window stools, and crown moulding ($4–$22 per linear foot).
• Fitting, hanging, mortising, and latch adjustment for interior pre-hung and slab doors ($444–$675 per unit).
• On-site timber adjustments, cabinet filler scribing, split casing repairs, and latch realignment ($367–$420 per job).
• Light timber partitions, structural shelving blocking, and interior framing ($40–$110 per hour, minimum 2 hours).

We explicitly exclude structural load-bearing modifications, foundation underpinning, plumbing alterations, electrical rough-ins, finish painting or staining, and wet plaster repairs. When a job requires work outside our finish carpentry discipline, the client must engage licensed independent trades.

How does an online inquiry become a confirmed project?

This website operates on an inquiry-only basis. There is no shopping cart, no instant checkout mechanism, and no facility for taking payments or issuing binding contracts directly through this domain.

Figures shown on this website represent standard empirical price ranges derived from typical residential projects across Chicago. They do not constitute an immediate binding quote. A project becomes a confirmed order only after:

1. Ivan Petrov conducts an in-person physical site inspection or reviews detailed opening measurements and photographs.
2. Existing wall plumb, corner squareness, and backing framing conditions are verified.
3. Timber moisture readings are validated with a pin meter (under 9% relative moisture required).
4. A written, itemized proposal detailing linear footage, unit counts, materials, and turnaround is mutually signed.

How are carpentry fees calculated and what changes a price?

All figures are stated in United States Dollars (USD). Our verified pricing models operate on four distinct bases:

• Wood trim and moulding: 4–22 USD $/linear ft.
• Simple structures, framing, and repair: 40–110 USD $/hr (strictly subject to a 2-hour minimum callout).
• On-site fitting and minor repair callouts: 367–420 USD $/job.
• Interior doors (pre-hung and slab fitting): 444–675 USD $/unit.

Final quotes depend directly on objective field factors: total linear footage; complexity of the moulding profile (flat casing versus deep ornate multi-piece crown); condition of underlying drywall or vintage lath-and-plaster; extent of hand scribing required for out-of-plumb walls; material grade (finger-jointed paint-grade pine versus architectural solid hardwood); and opening preparation. Unforeseen structural deterioration behind existing mouldings will be documented and priced via written change order prior to proceeding.

What rules govern acceptable use of this digital website?

Visitors to drevantos.com agree to use this site strictly for legitimate residential carpentry inquiries. Prohibited activities include:

• Submitting automated, forged, or malicious payloads through the inquiry form at wono392.php or the chat interface at vecob6f.php.
• Circumventing or probing form security measures, honeypot fields (company, weblink), or unix timestamp validations.
• Scraping site photography, text, technical diagrams, or 3D assets using automated spiders or harvesting bots.
• Attempting unauthorized access to administrative files, server roots, or local databases.
• Misrepresenting identity, address, or commercial affiliation when requesting callouts.

Who owns the intellectual property displayed on this site?

All content featured on drevantos.com—including written trade guides, timber tolerance specifications, original project photographs, vector brand marks, CSS design tokens, and the 3D model scene—is the exclusive intellectual property of Drevantos and Ivan Petrov, protected under United States and international copyright laws.

You are granted a limited, non-exclusive, non-transferable license to view and print pages for personal residential planning. Republication, distribution, or commercial exploitation of any photograph, graphic, or copy without written consent is strictly prohibited.

What warranties and conditions are explicitly disclaimed?

This website and all information regarding timber selection, profile installation, and door clearances are provided on an “as is” and “as available” basis without warranties of any kind, either express or implied.

While Ivan Petrov exercises strict technical diligence, we do not warrant that site functions will be uninterrupted or error-free. Furthermore, natural solid timber is an organic material subject to hygroscopic seasonal expansion and contraction; minor seasonal hairline gaps in exterior miter joints caused by extreme indoor humidity fluctuations (below 25% in Chicago winters or above 70% in summer) do not constitute defective carpentry.

What are the limits of legal liability under these terms?

To the maximum extent permitted by applicable law, Drevantos, Ivan Petrov, and any associated agents shall not be liable for any indirect, incidental, special, consequential, or punitive damages arising from the use of this website or reliance on digital estimate figures.

For completed on-site finish carpentry services, total cumulative liability for any claim arising under contract, negligence, or strict liability shall not exceed the total fees paid by the client for the specific service callout giving rise to the claim.

When can service access or project relationships be terminated?

Drevantos reserves the right to immediately suspend or terminate website access, refuse scope assessments, or decline on-site visits if a user violates these terms, submits fraudulent data, exhibits abusive behavior toward tradespeople, or if job site conditions fail to meet essential safety standards (such as presence of uncontained friable asbestos, active electrical hazards, or structural instability).

Which law governs these terms and where are disputes resolved?

These Terms of Service and any dispute, controversy, or claim arising out of or relating to this website or carpentry agreements shall be governed by and construed in accordance with the laws of the State of Illinois, United States, without regard to its conflict of law principles.

Both parties irrevocably consent to the exclusive jurisdiction and venue of the state and federal courts located in Chicago, Cook County, Illinois, for the resolution of any legal proceedings.

How will modifications to these terms be communicated?

We may revise these Terms of Service periodically to reflect operational adjustments, updated trade regulations, or platform compliance rules. Any updates take effect immediately upon posting to this URL with a revised effective date. Continued use of the website following changes constitutes binding acceptance of the amended terms.

How can you contact Drevantos regarding contractual terms?

For formal inquiries regarding these Terms of Service, scope verifications, or dispute notices, contact our workshop management:

What workmanship protections and warranty terms do we provide?

Drevantos warrants all residential finish carpentry and on-site fitting against defects in trade workmanship for a period of twelve (12) calendar months from the date of final client sign-off.

What is Covered:

• Fastener withdrawal or loosening of mechanically secured baseboard, casing, and crown moulding under ordinary residential usage.
• Failure of glued coped or mitered joints caused by insufficient adhesive coverage or improper biscuit/domino joinery.
• Hinge sagging or latch strike misalignment on interior doors hung or adjusted by Ivan Petrov, maintaining our 3 mm perimeter reveal standard.
• Loose jamb shimming or failure of structural backing blocks installed during light partition work.

What is Excluded:

• Movement, checking, or warping caused by interior relative humidity levels outside the 30% to 55% standard indoor range (such as flooded basements, unventilated steam showers, or winter heating without humidification).
• Settling, subsidence, or seismic movement of the building’s underlying framing, foundation, or floor joists.
• Work performed on customer-supplied warped, bowed, or green timber stock with moisture readings exceeding 10%.
• Damage resulting from subsequent trade interventions (painters removing doors, floor refinishers tearing off shoe mouldings, or plumbers penetrating trim).

To submit a warranty review, provide photographs of the affected joint or door reveal to [email protected] within thirty (30) days of observing the defect. Ivan Petrov inspects legitimate warranty claims on site and completes corrective adjustments at zero labor charge.

How does Drevantos ensure digital accessibility for all visitors?

Drevantos is dedicated to ensuring that our digital inquiries, trim specifications, and pricing tables are universally accessible to individuals with visual, auditory, motor, or cognitive disabilities. We engineer this website to conform with Level AA standards of the World Wide Web Consortium (W3C) Web Content Accessibility Guidelines (WCAG 2.1) and Section 508 requirements.

Key technical measures incorporated into our static frontend include:

• Semantic Document Architecture: Strict single-h1 hierarchy per page, well-ordered heading sequences, landmark regions (<header>, <main>, <footer>), and descriptive table header associations.
• Contrast Ratios: Contrast levels rigorously exceeding 7:1 for secondary copy and 12:1 for primary headings against our #E9EDF1 cool slate ground.
• Full Keyboard Operability: All interactive controls, forms, sidebar toggles, and chat dialogs are reachable and operable via sequential keyboard navigation without trapped focus.
• Motion Preferences: Strict adherence to prefers-reduced-motion media queries, disabling 3D scene rotations and replacing scrollytelling transitions with static stacked panels.
• Accessible Touch Targets: All buttons, links, and form fields provide at least 44px by 44px interactive target dimensions with distinct focus rings.

If you encounter an accessibility barrier on any portion of this website, or if you need assistance submitting a carpentry scope assessment, please notify us directly:

Accessibility Coordinator: Ivan Petrov
Telephone: +1 (707) 555-6244
Email: [email protected]
Response Standard: Technical accessibility remediations and direct phone accommodations are coordinated within 10 days of notification.